Natural Eutectic Solvents and Graphene Integrated within Emulsion Liquid Membrane System for Sodium Removal from Crude Biodiesel

This study reports a new technique for sodium ion removal from biodiesel using a green emulsion liquid membrane (GELM) system based on natural deep eutectic solvents (NADESs) and graphene. The DES consists of choline chloride with glycerol and lactic acid, and tetramethylammonium chloride with glycerol and lactic acid. COSMO-RS software was used to compute the intermolecular interaction of sodium with hydrogen bond acceptors and donors of the NADES. The simulation shows that NADES was the most effective stripping phase for sodium ion removal, which follows the experimental results. The investigation on the stability of ELM and sodium (830 ppm of initially) extraction efficiency showed that the GELM-NADES technique can achieves a sodium ion extraction efficiency of 99.6 % (3.17 ppm) with high stability at a homogenization speed of 8000 rpm, homogenization time of 3 min, HBA: HBD molar ratio of 1:4, 3 wt% of span 80, 10 minutes of extraction time, 400 rpm stirring speed and 0.5 treatment ratio. The presence of graphene (0.3 g) in the system further enhanced the efficiency and shortened the required extraction time from 6 to 4 min to meet the ASTM D6752 standards. The transport mechanism of sodium ions into the ELM phases adheres to the first-order kinetics model and film theory mechanisms. The overall mass transfer coefficient K O , mass transfer coefficient of the external phase in agitated reactor K M , and interfacial reaction rate constant K_F of 5.188 × 10⁻⁹, 1.373 × 10⁻⁷, and 5.392 × 10⁻⁹ m/s, respectively. ELM system with NADES and graphene can provide a cleaner route for biodiesel downstream processing.