MRI measurements and simulation predictions of gas dynamics in a fluidized bed

Gas dynamics in fluidized beds heavily influence chemical reactions, heat and mass transfer and overall hydrodynamics. Despite this fact, there have been few direct measurements of gas dynamics in fluidized beds (1, 2), due to the in obtaining reliable experimental data on gas motion in 3D beds filled with opaque particles. Subsequently, computational models of fluidized beds, which model the flow of gas and particles as well as their interaction, have been largely validated against experimental measurements of particle dynamics (3-5), leaving uncertainties in the accuracy of gas dynamics predicted by computational models. Recently, Boyce et al. (6) have presented results of an MRI study measuring gas dynamics in fluidized beds. These spatially-resolved measurements of time-averaged gas velocity and velocity distribution both in the bed of particles and in the freeboard provided many insights into the nature of gas flow through bubbling and particulate regions of fluidized beds. The measurements also showed time-averaged particle velocity and void fraction in the same fluidized bed to provide insights on how gas dynamics relate to particle dynamics. These measurements were previously compared against classical analytical theories for gas dynamics in fluidized beds (6), such as the two-phase theory of fluidization (7).

Here, we compare the MRI measurements with simulation predictions using the computational fluid dynamics - discrete element method CFD-DEM) (8). This simulation technique is commonly used for detailed simulations of laboratory-sized fluidized beds because it resolves the motion of each individual particle using a Lagrangian method, while resolving gas flow on Eulerian grids coarser than the particle diameter and accounting for gas-particle interaction using a drag law. The accuracy of this method in predicting gas and particle dynamics in bubbling and homogeneously fluidized beds is assessed, while varying important parameters such as drag law, fluid grid sizing and gas distribution. Additionally, since only time-averaged results could be provided experimentally, predictions from computer simulations are compared with classical analytical theory for gas flow in fluidized beds, such as bubble rise velocity (9) and gas flow through bubbles (10).