Abstract
Cycling races contain a multitude of motorcycles for various activities including television broadcasting. During parts of the race, these motorcycles can ride in close proximity of cyclists. Earlier studies focused on the impact of a nearby motorcycle on cyclist drag for in-line arrangements. It was shown that not only a motorcycle in front of a cyclist but also a motorcycle closely behind a cyclist can substantially reduce cyclist drag. However, there appears to be no information in the scientific literature about the impact of the motorcycle on cyclist drag for parallel and staggered arrangements. This paper presents wind tunnel measurements of cyclist drag for 32 different parallel and staggered cyclist-motorcycle arrangements. It is shown that the parallel arrangement leads to a drag increase for the cyclist, in the range of 5 to about 10% for a lateral distance of 2 to 1 m. The staggered arrangement can lead to either a drag increase or a drag decrease, where the latter is about 2% for most positions analyzed. For one of the parallel arrangements, computational fluid dynamics simulations were performed to provide insight into the reasons for the drag increase. A cyclist power model was used to convert the drag changes into potential time gains or losses. Compared to a lone cyclist riding at a speed of 46.8 km/h (13 m/s) on level road in calm weather, the time loss by a drag increase of 10%, 4% and − 2% was 2.16, 0.76 s and − 0.80 s per km, respectively. These time differences are large enough to influence the outcome of cycling races.
Original language | English |
---|---|
Article number | 7 |
Journal | Sports Engineering |
Volume | 24 |
Issue number | 1 |
Early online date | 7 Apr 2021 |
DOIs | |
Publication status | Published - Dec 2021 |
Keywords
- Aerodynamic cyclist drag
- Computational fluid dynamics
- Cycling aerodynamics
- Motorbike
- Wind tunnel
ASJC Scopus subject areas
- Biomedical Engineering
- Modelling and Simulation
- Orthopedics and Sports Medicine
- Physical Therapy, Sports Therapy and Rehabilitation
- Mechanics of Materials
- Mechanical Engineering