Even and odd mode cut-off parameters of pairs of ridges in rectangular waveguide using a mode matching solver

A. Mediavilla; J. A. Pereda; A. Casanueva; M. McKay; J. Helszajn

doi:10.1049/ip-map:20045053

Even and odd mode cut-off parameters of pairs of ridges in rectangular waveguide using a mode matching solver

A. Mediavilla, J. A. Pereda, A. Casanueva, M. McKay, J. Helszajn

School of Engineering & Physical Sciences

Research output: Contribution to journal › Article › peer-review

Abstract

A waveguide geometry of some interest consists of a symmetrical pair of ridges in a rectangular waveguide. The paper gives the even and odd mode cut-off spaces of such a structure in addition to its corresponding standing wave patterns. The classic power-voltage, power-current and voltage-current definitions of impedance of the two solutions are also evaluated. The calculations are based on a mode matching procedure and are verified separately using a finite element solver. A knowledge of these parameters is sufficient for the design of a proximity, reverse, directional coupler. © IEE, 2005.

Original language	English
Pages (from-to)	231-237
Number of pages	7
Journal	IEE Proceedings - Microwaves, Antennas and Propagation
Volume	152
Issue number	4
DOIs	https://doi.org/10.1049/ip-map:20045053
Publication status	Published - Aug 2005

Access to Document

10.1049/ip-map:20045053

Cite this

@article{99f9822910b14147960ff43d047d219f,

title = "Even and odd mode cut-off parameters of pairs of ridges in rectangular waveguide using a mode matching solver",

abstract = "A waveguide geometry of some interest consists of a symmetrical pair of ridges in a rectangular waveguide. The paper gives the even and odd mode cut-off spaces of such a structure in addition to its corresponding standing wave patterns. The classic power-voltage, power-current and voltage-current definitions of impedance of the two solutions are also evaluated. The calculations are based on a mode matching procedure and are verified separately using a finite element solver. A knowledge of these parameters is sufficient for the design of a proximity, reverse, directional coupler. {\textcopyright} IEE, 2005.",

author = "A. Mediavilla and Pereda, {J. A.} and A. Casanueva and M. McKay and J. Helszajn",

year = "2005",

month = aug,

doi = "10.1049/ip-map:20045053",

language = "English",

volume = "152",

pages = "231--237",

journal = "IEE Proceedings - Microwaves, Antennas and Propagation",

issn = "1359-706X",

publisher = "Institute of Electrical Engineers",

number = "4",

}

TY - JOUR

T1 - Even and odd mode cut-off parameters of pairs of ridges in rectangular waveguide using a mode matching solver

AU - Mediavilla, A.

AU - Pereda, J. A.

AU - Casanueva, A.

AU - McKay, M.

AU - Helszajn, J.

PY - 2005/8

Y1 - 2005/8

N2 - A waveguide geometry of some interest consists of a symmetrical pair of ridges in a rectangular waveguide. The paper gives the even and odd mode cut-off spaces of such a structure in addition to its corresponding standing wave patterns. The classic power-voltage, power-current and voltage-current definitions of impedance of the two solutions are also evaluated. The calculations are based on a mode matching procedure and are verified separately using a finite element solver. A knowledge of these parameters is sufficient for the design of a proximity, reverse, directional coupler. © IEE, 2005.

AB - A waveguide geometry of some interest consists of a symmetrical pair of ridges in a rectangular waveguide. The paper gives the even and odd mode cut-off spaces of such a structure in addition to its corresponding standing wave patterns. The classic power-voltage, power-current and voltage-current definitions of impedance of the two solutions are also evaluated. The calculations are based on a mode matching procedure and are verified separately using a finite element solver. A knowledge of these parameters is sufficient for the design of a proximity, reverse, directional coupler. © IEE, 2005.

U2 - 10.1049/ip-map:20045053

DO - 10.1049/ip-map:20045053

M3 - Article

SN - 1359-706X

VL - 152

SP - 231

EP - 237

JO - IEE Proceedings - Microwaves, Antennas and Propagation

JF - IEE Proceedings - Microwaves, Antennas and Propagation

IS - 4

ER -

Even and odd mode cut-off parameters of pairs of ridges in rectangular waveguide using a mode matching solver

Abstract

Access to Document

Fingerprint

Cite this