Calculation of productivity of a gas-condensate well: application of skin with rate dependent pseudo-pressure

Mahmoud Jamiolahmady, Ali Danesh, Ahmad Rezaei, Abdolrahim Ataei, Mehran Sedah Sohrabi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The most crucial region affecting well productivity is the perforated region. An accurate determination of perforation performance, required in the optimum design and well productivity estimation, could be made by fine grid simulation, but it would be costly with many technical limitations.The alternative practical approach is the use of a skin factor in open hole calculations resulting in the same flow performance as that of the perforated well.However most of the skin calculations done today are based on single-phase flow conditions.

In this work, we have developed a method to determine the effect of perforation on gas condensate well productivity by defining a skin factor to be used in the pseudo pressure application.The main problem is that pseudo pressure in such systems is a function of velocity and the conventional skin factor, which is calculated for a perforated well, cannot be used directly in open hole calculations.This is due to the fact that the gas and condensate relative permeability (k[r]) can increase significantly by increasing the flow rate, contrary to the common understanding.This effect, known as positive coupling, complicates the flow of gas and condensate near the wellbore even further when it competes with inertial losses at higher velocities typical of those around perforation tips.

The above complications, which require information on velocity-location in the perforation region, have been tackled by proposing new techniques with an emphasis on their practicality.Sensitivity studies, comparing the results of developed methods with those using finite element methods, indicated the reliability of the proposed techniques.The methods can be used to estimate variations of skin due to long-term condensate banking and the need for any intervention and remedial action.
Original languageEnglish
Title of host publicationSPE European Formation Damage Conference, 25-27 May 2005, Sheveningen, The Netherlands
PublisherSociety of Petroleum Engineers
Number of pages10
ISBN (Print)9781555639983
DOIs
Publication statusPublished - 2005
EventSPE European Formation Damage Conference 2005 - Scheveningen, Netherlands
Duration: 25 May 200527 May 2005

Conference

ConferenceSPE European Formation Damage Conference 2005
CountryNetherlands
CityScheveningen
Period25/05/0527/05/05

Fingerprint Dive into the research topics of 'Calculation of productivity of a gas-condensate well: application of skin with rate dependent pseudo-pressure'. Together they form a unique fingerprint.

Cite this