Analysis of Quad Ridge Horn Antenna At 3.5GHz Using 3D Printed For 5G Application

Mohd Azlishah Bin Othman; Nur Saqirah Binti Adnan; Redzuan Abd Manap; Abd Shukur Jaafar; Mohd Harris Misran; Maizatul Alice Meor Said; Nurmala Irdawaty Hassan; Shadia Suhaimi

Analysis of Quad Ridge Horn Antenna At 3.5GHz Using 3D Printed For 5G Application

Mohd Azlishah Bin Othman, Nur Saqirah Binti Adnan, Redzuan Abd Manap, Abd Shukur Jaafar, Mohd Harris Misran, Maizatul Alice Meor Said, Nurmala Irdawaty Hassan, Shadia Suhaimi

School of Engineering & Physical Sciences

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

This paper will focused on the analysis design of 3.5Ghz Quad Ridged Horn Antenna for Mid Band 5G application using 3D printed technique. The antenna was developed with a appropriate shape and size in consideration, as well as a decreased phase difference distribution across a wide frequency range, allowing it to achieve good radiation pattern performance. This antenna has been developed at 3.5GHz, with -28 dB S1 and 9.237 at directional gain. This project was purely used Polylactic Acid (PLA), a high strength thermoplastic material by using 3D printing technology for antenna prototype.

Original language	English
Title of host publication	Proceedings of the 4th International Conference on Telecommunication, Electronic and Computer Engineering (ICTEC2022)
Publisher	Penerbit UTeM Press
Pages	100-101
Number of pages	2
ISBN (Electronic)	9789672792741
Publication status	Published - Mar 2023

Keywords

Horn antenna
PLA
3D printing

Access to Document

https://ictec.utem.edu.my/images/THEME4/50_p100-101.pdf

Cite this

Othman, M. A. B., Adnan, N. S. B., Manap, R. A., Jaafar, A. S., Misran, M. H., Said, M. A. M., Hassan, N. I., & Suhaimi, S. (2023). Analysis of Quad Ridge Horn Antenna At 3.5GHz Using 3D Printed For 5G Application. In Proceedings of the 4th International Conference on Telecommunication, Electronic and Computer Engineering (ICTEC2022) (pp. 100-101). Penerbit UTeM Press. https://ictec.utem.edu.my/images/THEME4/50_p100-101.pdf

@inproceedings{1713b0dac2454d48b3ad48efa67b6169,

title = "Analysis of Quad Ridge Horn Antenna At 3.5GHz Using 3D Printed For 5G Application",

abstract = "This paper will focused on the analysis design of 3.5Ghz Quad Ridged Horn Antenna for Mid Band 5G application using 3D printed technique. The antenna was developed with a appropriate shape and size in consideration, as well as a decreased phase difference distribution across a wide frequency range, allowing it to achieve good radiation pattern performance. This antenna has been developed at 3.5GHz, with -28 dB S1 and 9.237 at directional gain. This project was purely used Polylactic Acid (PLA), a high strength thermoplastic material by using 3D printing technology for antenna prototype.",

keywords = "Horn antenna, PLA, 3D printing",

author = "Othman, {Mohd Azlishah Bin} and Adnan, {Nur Saqirah Binti} and Manap, {Redzuan Abd} and Jaafar, {Abd Shukur} and Misran, {Mohd Harris} and Said, {Maizatul Alice Meor} and Hassan, {Nurmala Irdawaty} and Shadia Suhaimi",

year = "2023",

month = mar,

language = "English",

pages = "100--101",

booktitle = "Proceedings of the 4th International Conference on Telecommunication, Electronic and Computer Engineering (ICTEC2022)",

publisher = "Penerbit UTeM Press",

}

Othman, MAB, Adnan, NSB, Manap, RA, Jaafar, AS, Misran, MH, Said, MAM, Hassan, NI & Suhaimi, S 2023, Analysis of Quad Ridge Horn Antenna At 3.5GHz Using 3D Printed For 5G Application. in Proceedings of the 4th International Conference on Telecommunication, Electronic and Computer Engineering (ICTEC2022). Penerbit UTeM Press, pp. 100-101. <https://ictec.utem.edu.my/images/THEME4/50_p100-101.pdf>

Analysis of Quad Ridge Horn Antenna At 3.5GHz Using 3D Printed For 5G Application. / Othman, Mohd Azlishah Bin; Adnan, Nur Saqirah Binti; Manap, Redzuan Abd et al.
Proceedings of the 4th International Conference on Telecommunication, Electronic and Computer Engineering (ICTEC2022). Penerbit UTeM Press, 2023. p. 100-101.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Analysis of Quad Ridge Horn Antenna At 3.5GHz Using 3D Printed For 5G Application

AU - Othman, Mohd Azlishah Bin

AU - Adnan, Nur Saqirah Binti

AU - Manap, Redzuan Abd

AU - Jaafar, Abd Shukur

AU - Misran, Mohd Harris

AU - Said, Maizatul Alice Meor

AU - Hassan, Nurmala Irdawaty

AU - Suhaimi, Shadia

PY - 2023/3

Y1 - 2023/3

N2 - This paper will focused on the analysis design of 3.5Ghz Quad Ridged Horn Antenna for Mid Band 5G application using 3D printed technique. The antenna was developed with a appropriate shape and size in consideration, as well as a decreased phase difference distribution across a wide frequency range, allowing it to achieve good radiation pattern performance. This antenna has been developed at 3.5GHz, with -28 dB S1 and 9.237 at directional gain. This project was purely used Polylactic Acid (PLA), a high strength thermoplastic material by using 3D printing technology for antenna prototype.

AB - This paper will focused on the analysis design of 3.5Ghz Quad Ridged Horn Antenna for Mid Band 5G application using 3D printed technique. The antenna was developed with a appropriate shape and size in consideration, as well as a decreased phase difference distribution across a wide frequency range, allowing it to achieve good radiation pattern performance. This antenna has been developed at 3.5GHz, with -28 dB S1 and 9.237 at directional gain. This project was purely used Polylactic Acid (PLA), a high strength thermoplastic material by using 3D printing technology for antenna prototype.

KW - Horn antenna

KW - PLA

KW - 3D printing

M3 - Conference contribution

SP - 100

EP - 101

BT - Proceedings of the 4th International Conference on Telecommunication, Electronic and Computer Engineering (ICTEC2022)

PB - Penerbit UTeM Press

ER -

Analysis of Quad Ridge Horn Antenna At 3.5GHz Using 3D Printed For 5G Application

Abstract

Keywords

Access to Document

Fingerprint

Cite this