A microfluidic photoelectrochemical cell for solar-driven CO2 conversion into liquid fuels with CuO-based photocathodes

Evangelos Kalamaras, Meltiani Belekoukia, Jeannie Z. Y. Tan, Jin Xuan, M. Mercedes Maroto-Valer, John M. Andresen

Research output: Contribution to journalArticle

Abstract

Utilising photoelectrochemical (PEC) devices to produce sustainable fuels from water and CO2 is a very attractive strategy, in which sunlight is used to convert the greenhouse gas (CO2) into a usable form of stored chemical energy. While significant progress has been made in the development of efficient photoactive catalysts for PEC reactions, limited efforts have been focused on the reactor design where continuous flow microfluidic PEC reactors are particular promising. In this work, a range of CuO-based thin films were used as photocathodes in a continuous flow microfluidic PEC reactor using CO2-saturated aqueous NaHCO3 solution under simulated AM 1.5 solar irradiation for up to 12 h. The highest photocurrent density obtained was for the α-Fe2O3/CuO photoelectrode yielding -1.0 mA cm-2 at 0.3 V vs. RHE and initial results indicated a solar-to-fuel (STF) efficiency of 0.48%. While the CuO, Cu2O and CuO-Cu2O photoelectrodes virtually only formed formate, the bilayer α-Fe2O3/CuO photocathode produced methanol in addition to formate indicating that combined copper and iron oxides in continuous flow microfluidic PEC cells have great potential of direct solar conversion into useful chemicals.

Original languageEnglish
Pages (from-to)329-344
Number of pages16
JournalFaraday Discussions
Volume215
Early online date16 Jan 2019
DOIs
Publication statusPublished - 1 Jul 2019

Fingerprint

formic acid
Photoelectrochemical cells
liquid fuels
Photocathodes
Liquid fuels
photocathodes
Microfluidics
formates
photoelectrochemical devices
cells
reactors
reactor design
chemical energy
greenhouses
copper oxides
sunlight
Photocurrents
iron oxides
Greenhouse gases
photocurrents

ASJC Scopus subject areas

  • Physical and Theoretical Chemistry

Cite this

@article{f98b1b94c21c475592c8e982b0b4438d,
title = "A microfluidic photoelectrochemical cell for solar-driven CO2 conversion into liquid fuels with CuO-based photocathodes",
abstract = "Utilising photoelectrochemical (PEC) devices to produce sustainable fuels from water and CO2 is a very attractive strategy, in which sunlight is used to convert the greenhouse gas (CO2) into a usable form of stored chemical energy. While significant progress has been made in the development of efficient photoactive catalysts for PEC reactions, limited efforts have been focused on the reactor design where continuous flow microfluidic PEC reactors are particular promising. In this work, a range of CuO-based thin films were used as photocathodes in a continuous flow microfluidic PEC reactor using CO2-saturated aqueous NaHCO3 solution under simulated AM 1.5 solar irradiation for up to 12 h. The highest photocurrent density obtained was for the α-Fe2O3/CuO photoelectrode yielding -1.0 mA cm-2 at 0.3 V vs. RHE and initial results indicated a solar-to-fuel (STF) efficiency of 0.48{\%}. While the CuO, Cu2O and CuO-Cu2O photoelectrodes virtually only formed formate, the bilayer α-Fe2O3/CuO photocathode produced methanol in addition to formate indicating that combined copper and iron oxides in continuous flow microfluidic PEC cells have great potential of direct solar conversion into useful chemicals.",
author = "Evangelos Kalamaras and Meltiani Belekoukia and Tan, {Jeannie Z. Y.} and Jin Xuan and Maroto-Valer, {M. Mercedes} and Andresen, {John M.}",
year = "2019",
month = "7",
day = "1",
doi = "10.1039/c8fd00192h",
language = "English",
volume = "215",
pages = "329--344",
journal = "Faraday Discussions",
issn = "1359-6640",
publisher = "Royal Society of Chemistry",

}

A microfluidic photoelectrochemical cell for solar-driven CO2 conversion into liquid fuels with CuO-based photocathodes. / Kalamaras, Evangelos; Belekoukia, Meltiani; Tan, Jeannie Z. Y.; Xuan, Jin; Maroto-Valer, M. Mercedes; Andresen, John M.

In: Faraday Discussions, Vol. 215, 01.07.2019, p. 329-344.

Research output: Contribution to journalArticle

TY - JOUR

T1 - A microfluidic photoelectrochemical cell for solar-driven CO2 conversion into liquid fuels with CuO-based photocathodes

AU - Kalamaras, Evangelos

AU - Belekoukia, Meltiani

AU - Tan, Jeannie Z. Y.

AU - Xuan, Jin

AU - Maroto-Valer, M. Mercedes

AU - Andresen, John M.

PY - 2019/7/1

Y1 - 2019/7/1

N2 - Utilising photoelectrochemical (PEC) devices to produce sustainable fuels from water and CO2 is a very attractive strategy, in which sunlight is used to convert the greenhouse gas (CO2) into a usable form of stored chemical energy. While significant progress has been made in the development of efficient photoactive catalysts for PEC reactions, limited efforts have been focused on the reactor design where continuous flow microfluidic PEC reactors are particular promising. In this work, a range of CuO-based thin films were used as photocathodes in a continuous flow microfluidic PEC reactor using CO2-saturated aqueous NaHCO3 solution under simulated AM 1.5 solar irradiation for up to 12 h. The highest photocurrent density obtained was for the α-Fe2O3/CuO photoelectrode yielding -1.0 mA cm-2 at 0.3 V vs. RHE and initial results indicated a solar-to-fuel (STF) efficiency of 0.48%. While the CuO, Cu2O and CuO-Cu2O photoelectrodes virtually only formed formate, the bilayer α-Fe2O3/CuO photocathode produced methanol in addition to formate indicating that combined copper and iron oxides in continuous flow microfluidic PEC cells have great potential of direct solar conversion into useful chemicals.

AB - Utilising photoelectrochemical (PEC) devices to produce sustainable fuels from water and CO2 is a very attractive strategy, in which sunlight is used to convert the greenhouse gas (CO2) into a usable form of stored chemical energy. While significant progress has been made in the development of efficient photoactive catalysts for PEC reactions, limited efforts have been focused on the reactor design where continuous flow microfluidic PEC reactors are particular promising. In this work, a range of CuO-based thin films were used as photocathodes in a continuous flow microfluidic PEC reactor using CO2-saturated aqueous NaHCO3 solution under simulated AM 1.5 solar irradiation for up to 12 h. The highest photocurrent density obtained was for the α-Fe2O3/CuO photoelectrode yielding -1.0 mA cm-2 at 0.3 V vs. RHE and initial results indicated a solar-to-fuel (STF) efficiency of 0.48%. While the CuO, Cu2O and CuO-Cu2O photoelectrodes virtually only formed formate, the bilayer α-Fe2O3/CuO photocathode produced methanol in addition to formate indicating that combined copper and iron oxides in continuous flow microfluidic PEC cells have great potential of direct solar conversion into useful chemicals.

UR - http://www.scopus.com/inward/record.url?scp=85068517690&partnerID=8YFLogxK

U2 - 10.1039/c8fd00192h

DO - 10.1039/c8fd00192h

M3 - Article

VL - 215

SP - 329

EP - 344

JO - Faraday Discussions

JF - Faraday Discussions

SN - 1359-6640

ER -