If you made any changes in Pure these will be visible here soon.

Research Output

  • 23 Article
  • 2 Chapter
  • 2 Conference contribution
  • 1 Literature review
Filter
Article
2020
Open Access
File
4 Downloads (Pure)

Effects of contusion load on cervical spinal cord: A finite element study

Zhu, R., Chen, Y., Yu, Q., Liu, S., Wang, J., Zeng, Z. & Cheng, L., 16 Jan 2020, In : Mathematical Biosciences and Engineering. 17, 3, p. 2272-2283 12 p.

Research output: Contribution to journalArticle

Open Access
File
2 Downloads (Pure)

Identification of Tumor Nodule in Soft Tissue - An Inverse Finite-element Framework based on Mechanical Characterization

Candito, A., Palacio-Torralba, J., Jiménez-Aguilar, E., Good, D. W., McNeill, S. A., Reuben, R. L. & Chen, Y., 25 May 2020, In : International Journal for Numerical Methods in Biomedical Engineering.

Research output: Contribution to journalArticle

Open Access
2017

A Novel Method for Rapid and Quantitative Mechanical Assessment of Soft Tissue for Diagnostic Purposes: A Computational Study

Palacio Torralba, J., Good, D. W., Stewart, G. D., McNeilly, A. S., Reuben, R. L. & Chen, Y., 23 Aug 2017, In : International Journal for Numerical Methods in Biomedical Engineering. p. 1-12 12 p.

Research output: Contribution to journalArticle

Open Access
File
67 Downloads (Pure)
Open Access
File
42 Downloads (Pure)

Histology-based homogenization analysis of soft tissue: application to prostate cancer

Palacio Torralba, J., Good, D. W., McNeilly, A. S., Reuben, R. L. & Chen, Y., 12 Apr 2017, In : Interface. 14, 129, 20170088.

Research output: Contribution to journalArticle

Open Access
File
33 Downloads (Pure)

Quantitative mechanical assessment of the whole prostate gland ex vivo using dynamic instrumented palpation

Hammer, S. J., Good, D. W., Scanlan, P. C., Palacio Torralba, J., Phipps, S., Stewart, G. D., Shu, W., Chen, Y., McNeill, S. A. & Reuben, R. L., Dec 2017, In : Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 231, 12, p. 1081-1100 20 p.

Research output: Contribution to journalArticle

Open Access
File
36 Downloads (Pure)
2016

Patient specific modeling of palpation-based prostate cancer diagnosis: effects of pelvic cavity anatomy and intrabladder pressure

Palacio Torralba, J., Jiménez Aguilar, E., Good, D. W., Hammer, S., McNeill, A. S., Stewart, G. D., Reuben, R. L. & Chen, Y., Jan 2016, In : International Journal for Numerical Methods in Biomedical Engineering. 32, 1, e02734.

Research output: Contribution to journalArticle

Open Access
File
117 Downloads (Pure)
2015

Quantitative diagnostics of soft tissue through viscoelastic characterization using time-based instrumented palpation

Palacio Torralba, J., Hammer, S. J., Good, D. W., McNeill, A. S., Stewart, G. D., Reuben, R. L. & Chen, Y., Jan 2015, In : Journal of the Mechanical Behavior of Biomedical Materials. 41, p. 149-160 12 p.

Research output: Contribution to journalArticle

Open Access
File
90 Downloads (Pure)
2013

Bioinspired lightweight cellular materials - understanding effects of natural variation on mechanical properties

Cadman, J. E., Chang, C-C., Chen, J., Chen, Y., Zhou, S., Li, W. & Li, Q., 1 Aug 2013, In : Materials Science and Engineering: C. 33, 6, p. 3146-3152 7 p.

Research output: Contribution to journalArticle

Multiscale design of surface morphological gradient for osseointegration

Chen, J., Rungsiyakull, C., Li, W., Chen, Y., Swain, M. & Li, Q., Apr 2013, In : Journal of the Mechanical Behavior of Biomedical Materials. 20, p. 387-397 11 p.

Research output: Contribution to journalArticle

2012

Cuttlebone: characterisation, application and development of biomimetic materials

Cadman, J., Zhou, S., Chen, Y. & Li, Q., Sep 2012, In : Journal of Bionic Engineering. 9, 3, p. 367-376 10 p.

Research output: Contribution to journalArticle

Design and fabrication of biphasic cellular materials with transport properties - A modified bidirectional evolutionary structural optimization procedure and MATLAB program

Zhou, S., Cadman, J., Chen, Y., Li, W., Xie, Y. M., Huang, X., Appleyard, R., Sun, G. & Li, Q., Dec 2012, In : International Journal of Heat and Mass Transfer. 55, 25-26, p. 8149-8162 14 p.

Research output: Contribution to journalArticle

2011

Computer-aided Design and Fabrication of Bio-Mimetic Materials and Scaffold Micro-structures

Chen, Y., Cadman, J., Zhou, S. & Li, Q., 2011, In : Advanced Materials Research. 213, p. 628-632 5 p.

Research output: Contribution to journalArticle

Design Optimization of Scaffold Microstructures Using Wall Shear Stress Criterion Towards Regulated Flow-Induced Erosion

Chen, Y., Schellekens, M., Zhou, S., Cadman, J., Li, W., Appleyard, R. & Li, Q., 19 Sep 2011, In : Journal of Biomechanical Engineering. 133, 8, p. 081008-1-081008-10 10 p.

Research output: Contribution to journalArticle

Mathematical modeling of degradation for bulk-erosive polymers: Applications in tissue engineering scaffolds and drug delivery systems

Chen, Y., Zhou, S. & Li, Q., Mar 2011, In : Acta Biomaterialia. 7, 3, p. 1140-1149 10 p.

Research output: Contribution to journalArticle

Microstructure design of biodegradable scaffold and its effect on tissue regeneration

Chen, Y., Zhou, S. & Li, Q., Aug 2011, In : Biomaterials. 32, 22, p. 5003-5014 12 p.

Research output: Contribution to journalArticle

Topology optimization for negative permeability metamaterials using level-set algorithm

Zhou, S., Li, W., Chen, Y., Sun, G. & Li, Q., Apr 2011, In : Acta Materialia. 59, 7, p. 2624-2636 13 p.

Research output: Contribution to journalArticle

2010

Characterization of cuttlebone for a biomimetic design of cellular structures

Cadman, J., Zhou, S., Chen, Y., Li, W., Appleyard, R. & Li, Q., Mar 2010, In : Acta Mechanica Sinica. 26, 1, p. 27-35 9 p.

Research output: Contribution to journalArticle

Design of Cellular Porous Biomaterials for Wall Shear Stress Criterion

Chen, Y., Zhou, S., Cadman, J. & Li, Q., 1 Nov 2010, In : Biotechnology and Bioengineering. 107, 4, p. 737-746 10 p.

Research output: Contribution to journalArticle

Mathematical modeling of polymer biodegradation and erosion

Chen, Y. & Li, Q., 2010, In : Advanced Materials Research. p. 2071-2074 4 p.

Research output: Contribution to journalArticle

Multiobjective topology optimization for finite periodic structures

Chen, Y., Zhou, S. & Li, Q., Jun 2010, In : Computers and Structures. 88, 11-12, p. 806-811 6 p.

Research output: Contribution to journalArticle

2009

Computational design for multifunctional microstructual composites

Chen, Y., Zhou, S. & Li, Q., 20 Mar 2009, In : International Journal of Modern Physics B. 23, 6-7, p. 1345-1351 7 p.

Research output: Contribution to journalArticle