Research Output 1967 2019

Filter
Paper
2019
Ultrafast lasers
Microfluidics
Glass
Rapid prototyping
Photolithography
2018

Early arriving photon imaging for locating optical endomicroscopy fibres and medical devices

Tanner, M. G., Henderson, R. K., Dhaliwal, K. & Thomson, R. R., Sep 2018.

Research output: Contribution to conferencePaper

optical fibers
photons
endoscopes
prototypes
detectors

Fibre-based sensing of physiological parameters with time-resolved single photon spectroscopy

Ehrlich, K., Thomson, R. R. & Tanner, M. G., Sep 2018.

Research output: Contribution to conferencePaper

fibers
photons
spectroscopy
Raman spectra
fluorescence

Multispectral fibre imaging of lung disease

Parker, H. E., Stone, J. M., Thomson, R. R., Dhaliwal, K., Krstajić, N. & Tanner, M. G., Sep 2018.

Research output: Contribution to conferencePaper

lungs
bundles
fibers
infectious diseases
emission spectra
2017
Open Access
File
welding
machining
microstructure
fabrication
glass

Scale effects of strains in mineralised turkey leg tendon measured by SAXS and XRD during micropillar compression.

Groetsch, A., Gourrier, A., Schwiedrzik, J., Sztucki, M., Shephard, J., Michler, J., Zysset, P. K. & Wolfram, U., 2017.

Research output: Contribution to conferencePaper

Simultaneous micropillar compression and X-ray scattering or diffraction to investigate scale effects of strains in mineralised collagen fibres

Groetsch, A., Gourrier, A., Schwiedrzik, J., Sztucki, M., Shephard, J., Michler, J., Zysset, P. K. & Wolfram, U., 2017.

Research output: Contribution to conferencePaper

Tamper-proof holographic markings for high-value goods

Wlodarczyk, K. L., Ardron, M., Waddie, A. J., Taghizadeh, M. R., Weston, N. J. & Hand, D. P., 29 Jun 2017.

Research output: Contribution to conferencePaper

Open Access
File
2016

ADMM for Maximum Correntropy Criterion

Zhu, F., Halimi, A., Honeine, P., Chen, B. & Zheng, N., Jul 2016.

Research output: Contribution to conferencePaper

Pixels
Learning systems
Signal to noise ratio
Signal processing
Image processing

Filtering Smooth Altimetric Signals Using a Bayesian Algorithm

Halimi, A., Buller, G. S., McLaughlin, S. & Honeine, P., 2016.

Research output: Contribution to conferencePaper

Open Access
File
Parameter estimation
Satellites

First light of a laser frequency comb at SALT

Depagne, E., McCracken, R. A., Reid, D. T., Kuhn, R. B., Erasmus, N. A. & Crause, L. A., 28 Jun 2016, p. 9908-387.

Research output: Contribution to conferencePaper

telescopes
spectrographs
luminaires
lasers
wavelengths

Frequency-light tuning in gas-filled hollow-core photonic crystal fibers

Saleh, M. F. & Biancalana, F., 5 Sep 2016.

Research output: Contribution to conferencePaper

Open Access
File

Nonlinear hyperspectral unmixing accounting for spatial illumination variability

Halimi, A., Honeine, P., Bioucas-Dias, J. M., Buller, G. S. & McLaughlin, S., 21 Aug 2016. 5 p.

Research output: Contribution to conferencePaper

Open Access
File
Lighting
Computational complexity

Picosecond laser welding of optical to structural materials

Hand, D. P., Carter, R., Chen, J., Troughton, M., Elder, I., Lamb, R. A., Thomson, R. R. & Esser, M. J. D., 2016.

Research output: Contribution to conferencePaper

laser welding
stainless steels
ultrashort pulsed lasers
steels
silica glass

Restoration of intensity and depth images constructed using sparse single-photons data

Halimi, A., Altmann, Y., McCarthy, A., Ren, X., Tobin, R., Buller, G. S. & McLaughlin, S., 28 May 2016, (Accepted/In press).

Research output: Contribution to conferencePaper

Open Access
File
Restoration
Photons
Cosine transforms
Costs

Robust spectral unmixing of multispectral Lidar waveforms

Altmann, Y., Maccarone, A., McCarthy, A., Newstadt, G., Buller, G. S., McLaughlin, S. & Hero, A., 22 Aug 2016.

Research output: Contribution to conferencePaper

Open Access
File
lidar
outlier
laser
anomaly
methodology

Robust unmixing algorithms for hyperspectral imagery

Halimi, A., Altmann, Y., Buller, G. S., McLaughlin, S., Oxford, W., Clarke, D. & Piper, J., 16 Jun 2016, (Accepted/In press).

Research output: Contribution to conferencePaper

Open Access
File
imagery
outlier
2015

1-GHz harmonically pumped femtosecond optical parametric oscillator frequency comb

Balskus, K., Leitch, S. M., Zhang, Z., McCracken, R. A. & Reid, D. T., 2015, (Unpublished).

Research output: Contribution to conferencePaper

Atomically referenced 1-GHz optical parametric oscillator frequency comb

McCracken, R. A., Balskus, K., Zhang, Z. & Reid, D. T., 2015, (Unpublished).

Research output: Contribution to conferencePaper

Comb-mode resolved laser frequency comb by Fabry-Pérot-cavity filtering of a femtosecond optical parametric oscillator

Zhang, Z., Balskus, K., McCracken, R. A. & Reid, D. T., 2015, (Unpublished).

Research output: Contribution to conferencePaper

Composite 1-GHz optical parametric oscillator frequency comb from 400 – 1900 nm

McCracken, R. A., Balskus, K., Zhang, Z. & Reid, D. T., 2015.

Research output: Contribution to conferencePaper

Laser micro-welding of optical materials

Carter, R., Chen, J., Thomson, R. R. & Hand, D. P., 19 Nov 2015.

Research output: Contribution to conferencePaper

transparence
optical materials
welding
heat affected zone
glass

Laser processing of Borofloat®33 glass

Wlodarczyk, K. L., MacPherson, W. N. & Hand, D. P., May 2015.

Research output: Contribution to conferencePaper

Open Access
File

Laser processing of thin flex glass for microelectronic, OLED lighting, display and PV applications

Wlodarczyk, K. L., Brunton, A., Rumsby, P. & Hand, D. P., Jun 2015.

Research output: Contribution to conferencePaper

microelectronics
illuminating
glass
drilling
wavelengths

Mid-infrared 333-MHz frequency comb continuously tunable from 1.95 µm to 4.0 µm

Balskus, K., Zhang, Z., McCracken, R. A. & Reid, D. T., 2015.

Research output: Contribution to conferencePaper

Mid-infrared 333-MHz frequency comb continuously tunable from 1.95 μm to 4.0 μm

Balskus, K., Zhang, Z., McCracken, R. A. & Reid, D. T., 2015.

Research output: Contribution to conferencePaper

Optical Frequency Metrology with a Femtosecond Optical Parametric Oscillator Frequency Comb

Balskus, K., Schilt, S., Wittwer, V. J., Brochard, P., Ploetzing, T., Jornod, N., McCracken, R. A., Zhang, Z., Bartels, A., Sudmeyer, T. & Reid, D. T., 2015.

Research output: Contribution to conferencePaper

2014

At the cross-roads of effective quantum information processing with integrated optical gates

Smith, P. G. R., Gates, J. C., Holmes, C., Carpenter, L. G., Kundys, D., Menna, F. L. & Posner, M. T., 24 May 2014.

Research output: Contribution to conferencePaper

photons
Bragg gratings
interferometry
bosons
platforms

Direct laser-writing of optical micro-structures for robust traceability marking of metal components

Wlodarczyk, K. L., Ardron, M., Weston, N., Kidd, M. & Hand, D. P., 2014.

Research output: Contribution to conferencePaper

marking
melting
nickel
Inconel (trademark)
microstructure

Laser texturing for high friction applications

Dunn, A., Carstensen, J. V., Wlodarczyk, K. L., Hansen, E. B., Gabzdyl, J., Harrison, P. M., Shephard, J. D. & Hand, D. P., Oct 2014.

Research output: Contribution to conferencePaper

Precision laser processing for optical device manufacture

Hand, D. P., Wlodarczyk, K. L., Albri, F., Li, J., Ardron, M., Carter, R. & Shephard, J. D., Jun 2014.

Research output: Contribution to conferencePaper

2013

High-field bessel pulses and shock-front assisted resonant radiation

Roger, T., Li, C., Saleh, M. F., Roy, S., Biancalana, F. & Faccio, D. F. A., 12 Aug 2013, p. 345.

Research output: Contribution to conferencePaper

Picosecond laser machining of Borofloat®33 glass

Wlodarczyk, K. L. & Hand, D. P., Mar 2013.

Research output: Contribution to conferencePaper

Speckle-free laser marking of metals using liquid-crystal-based spatial light modulator

Wlodarczyk, K. L., Kaakkunen, J. J. J., Vahimaa, P. & Hand, D. P., 2013.

Research output: Contribution to conferencePaper

Open Access
File
metal crystals
light modulators
marking
liquid crystals
lasers
2012

Infrared reflecting coverglass for Multijunction cells in a Terrestrial 500x concentrating photovoltaic system

Mitcheli, L., Sarmah, N., Luo, X. & Mallick, T., 2012, (In preparation).

Research output: Contribution to conferencePaper

Laser precision surface sculpting of 2D diffractive optical structures on metals

Giet, S., Dunn, A., Ardron, M., Kidd, M. D., Maier, R. R. J., Weston, N. J. & Hand, D. P., 2012, p. 929-934. 6 p.

Research output: Contribution to conferencePaper

Metals
Lasers
Martensitic stainless steel
Diffraction efficiency
Stainless Steel
Open Access
File
adaptive optics
optics
glass
lasers
graphite
2011

Micro-sculpting of diffractive scales on metal surfaces for optical position encoders, the 'YAGboss' process

Giet, S., Ardron, M., Albri, F., Kidd, M. D., Maier, R. R. J., Shephard, J. D., Weston, N. J. & Hand, D. P., 2011, p. 1126-1130. 5 p.

Research output: Contribution to conferencePaper

Metals
Textures
Lasers
Diffraction gratings
Laser radiation

Picosecond laser machining of fiber based sensing devices

Albri, F., Li, J., Maier, R. R. J., MacPherson, W. N. & Hand, D. P., 2011, p. 1049-1054. 6 p.

Research output: Contribution to conferencePaper

Machining
Fibers
Lasers
Sensors
Fused silica
2010

Design and performance evaluation of a prototype dielectric photovoltaic concentrator

Sarmah, N., Natarajan, S. K., Richards, B. & Mallick, T., 2010.

Research output: Contribution to conferencePaper

2009
Microelectronics
Semiconductor lasers
Machining
Lasers
Temperature

Optimised line axis dielectric asymmetric compound parabolic photovoltaic concentrator: an optical analysis

Sarmah, N., Mallick, T. & Richards, B., 2009.

Research output: Contribution to conferencePaper

1991

Comments on lasing without inversion

Lu, W. & Harrison, R. G., 1991.

Research output: Contribution to conferencePaper